Earth hatch pattern (rotated 45 degrees)

[goodtastingsteak]

Does anyone have a .pat file for this? I would like to use the 45-degrees rotated earth hatch for a cut pattern for a floor but it only lets me select from the drafting patterns. The default one that comes with Revit is 90/180 degrees.

Previously, I resorted to making the hatch in AutoCAD, importing it, and exploding it and using a filled region, but I figured SOMEONE must have it, so if anyone could help me out, it would be greatly appreciated. And I think that trying to draw it out via writing the code in a notepad file is a little over my head.

Thanks

[Alfredo Medina]

There is one at Paul Aubin's blog at https://www.box.net/shared/kd75hr00lj

[goodtastingsteak]

Thanks so much!

Man Alfredo, you are a beast. You've answered so many of my questions already. Thank you very much.

[jaleel73]

There is one at Paul Aubin's blog at https://www.box.net/shared/kd75hr00lj
thank you sir

[hugh.69031]

You can create a new, rotated, rescaled fill and assign its type to DRAFTING or MODEL from any loaded fill with the free HatchKit Add-In for Revit.