Wall Wrap To Center?

[antman]

When I set layers in my wall to wrap, and the wall type to wrap exterior at inserts, it wraps to the center of the wall. Is there any way to change that? See attached image - this window has a void extrusion around the edge to make the jog, but this happens even at inserts that do not have this jog.

[Dimitri Harvalias]

Check out this thread from a while back. the same applies to the current version of Revit.
http://forums.augi.com/showthread.php?t=88009&highlight=wall+closure

[antman]

Check out this thread from a while back. the same applies to the current version of Revit.
http://forums.augi.com/showthread.php?t=88009&highlight=wall+closure

Perfect, thanks!

[antman]

Interesting - now it appears that the layer wraps at the sides of the insert, but not the top and bottom?

[Dimitri Harvalias]

That's correct. Wraps do not occur at the top and bottom of openings. You'll need to include any finishes you want as part of your window or door family. On the list of long standing wish list items.

[bcm2345]

Is there any way to change that?


did you try the edit cut profile tool?

or if you want it to wrap in the model- set each wall layer to wrap or not..

and then choose which way you want those to wrap at the inserts..

you may also need to add a reference plane in that window family
where you want those wraps to stop..
__________________
DISCLAIMER: That's just the way I know how to do it in Revit- YOU do it YOUR way.
I don't read any answers until after I answer. I'm answering to help myself learn- I don't
get paid for it. If it helps anybody- fine. If you come "Out There"- I WILL help you learn.