Propagate elevation marker extents?

[damon.sidel]

Is there any way to propagate section marker extents to multiple views (including the gap in segments) to multiple views? Kind of like the grids? I'm working on a tower and I'd rather not go through every plan and adjust the section markers.

On a related note, is there a way to control the size of the gap in section segments?

EDIT: Funny behavior... when I changed the section markers on one plan view, many others changed, too... but not all!

[graphite]

Could you possibly copy to clipboard and then paste to selected level. I do not think this would duplicate the view but only update the section marker with the desired length and break within the line. The gap in the section should be controllable by little blue handle grips.

[damon.sidel]

I'll give the copy/paste a try. Thanks!

The little blue grips are exactly the problem. They update on many plans, but not on all. I end up dragging hundreds of those around. It just took me ~2 minutes per plan (about 2 hours) to just adjust mostly the sections markers on all the plans. :(

[nik781707]

It works if you change the section mark on the view you first placed it on. I've just place a section mark on a 12 storey building and broken the line and it appeared like that on every level. However, if you try to do it on a level you didn't originally place the section mark on, it not only won't change on every other level, but even if you then go back to the level you originally placed it on, it will no longer work.