Wonky interior elevations

[Design Apparatus]

I've got a situation where I have a CMU wall (existing phase) with doors hosted in it. 3 inches away from the CMU wall is a 4" freezer wall (new construction phase) which has had profiles cut into it to show the doors in elevation on that side.
The problem I am encountering is that the interior elevation on the CMU wall side shows the man door, but with CMU pattern showing through the metal door. The 10'x10' sectional overhead door does not even show up (dashed green lines added to indicate location).
Anybody have any ideas as to why this is happening? I've never come across it before and any help would be greatly appreciated.
874278742887429

[Design Apparatus]

Also, when I change the CMU wall to "New Construction", the issue goes away. Would like to be able to use phasing, with existing and new construction elements and get them to view properly in interior elevations.

[Design Apparatus]

Figured it out....somebody at RevitForum posted to check my phase filters. I changed it to Show Complete...that fixed it:)