Educational Plot Stamp detected

[cskelton]

I have received a drawing from a third party that must be inserted into another drawing. This drawing was apparently produced with an Autodesk Educational Product. When the drawing is inserted or copied into another drawing the "Produced by and Autodesk Educational Product" banner appears on the plot. Can this drawing be converted into a "full version" drawing.

[cskelton]

I have answered my own question.

[Kris.Keller]

I have answered my own question.
What was the answer?

[Mike.Perry]

Hi

The following threads contain some relevant information on this subject -

Educational stamp issues (http://forums.augi.com/showthread.php?t=6708)

Educational plot stamps (http://forums.augi.com/showthread.php?t=8375)

Have a good one, Mike

[fjtdogeno]

I have received a drawing from a third party that must be inserted into another drawing. This drawing was apparently produced with an Autodesk Educational Product. When the drawing is inserted or copied into another drawing the "Produced by and Autodesk Educational Product" banner appears on the plot. Can this drawing be converted into a "full version" drawing.

This is the answer....
1. open the drawing file affected by this autodesk product.........
2. on the command prompt type DXFOUT then save
3. then type DXFIN then click the DXF file and open
4. then saveas your drawing in another DWG filename then print it

cheers

[cadtag]

Better answer for future:

Do not do business with that third party entity ever again. Inform them that their illegal use of software is putting your firm at risk and costing you time and money.



Frankly if they are willing to shaft you to save a buck, they are not people you can safely do business with

[e.mounir]

Hi
I need say some thing some times if you have a deferent ltypeshp.shp and ltypeshp.shx file this way not working
You should be change this to one of original shape and line type then purge it and make it DXF and DWG in the final
I hope that is clear