thomas.denney836893
2013-06-18, 05:01 PM
I need to make a glazing schedule for the store front system we are designing. The highest horizontal strip is frosted at 100%(G1) the next horizontal strip down is at about 40%(G2) then there are three sequential strips that are all plain with zero fritting (G3), and then the bottom horizontal strip is an aluminum spandrell panel(SP-1). I'd like to be able to tag each type and then have a text legend for each tag type that had a row next to the tag types describing what each designation is.
I already have the curtainwall system panels set-up into the 4 types in terms of properties, a G1-3 and an SP-1. I then assigned the various types the G!-3 and SP-1 designations under the Identity Data>Type Comments when you click on the EDIT TYPE for each panel type, I have a custom tag I made for curtainwall panels that is tagging properly, but I fail at the next step which is setting up a text legend of the 4 tag types.
I'm sure this is something very easy and I'm just noob enough to not connect the dots on how to make this happen. If anyone can offer a few pointers that would be great.
I already have the curtainwall system panels set-up into the 4 types in terms of properties, a G1-3 and an SP-1. I then assigned the various types the G!-3 and SP-1 designations under the Identity Data>Type Comments when you click on the EDIT TYPE for each panel type, I have a custom tag I made for curtainwall panels that is tagging properly, but I fail at the next step which is setting up a text legend of the 4 tag types.
I'm sure this is something very easy and I'm just noob enough to not connect the dots on how to make this happen. If anyone can offer a few pointers that would be great.