View Depth

[gsteffen642486]

Every plan show the walls, toilets sinks etc. from the level below. I have the bottom of my primary range set to (Associated Level) level 4 , which is the current level and my view depth Set to level 4 with the offset of 0,0 matching the Bottom of the primary range. I can even see the half walls on the level below which are more than 10' below my level 4 cut plane. I have tried changing everything in the view range and nothing seems to work. Any ideas?

[PijPiwo]

Have you checked the underlay?

[CADastrophe]

Sounds like your Views have an Underlay set. Check your Views' Properties for "Underlay" - it should be set to "None".

[gsteffen642486]

Thank you!! My frustration and annoyance is over.

[MikeJarosz]

I have the same problem all the time. It looks like creating a plan view turns on the underlay automatically. Is there a way to turn this off?

[CADastrophe]

I've neither found nor heard of a way to negate that. I always right-click and duplicate Views in lieu of using the "New View" function on the Ribbon (except for the first View of a Level, or course). That way, I also avoid that obnoxious "Do Not Duplicate Existing Views" checkbox.