Save Errors

[pstern53721223]

Folks, I keep on getting a radio box when I paste a block, and often during just a quick-save, which says "autocad lt 2017 warning: an error occurred during save. we recommend that you run recover on the drawing. This has happened on several drawings, and I have run recover (with no errors), audit (again with no errors) and just "wblocked" the whole drawing. The drawings aren't getting corrupted, they are editable, saveable and printable. Any thoughts about what else I can try would be greatly appreciated.

Thanks.

[rkmcswain]

Do you have all of the service packs installed? This was a known issue with Civil 3D (http://forums.autodesk.com/t5/autocad-civil-3d-forum/copy-to-clipboard-error-civil-3d-2017/td-p/6501650) and SP1 (and SP1.1) should have fixed it.
I've not heard of it in "LT", but anything is possible.

[pstern53721223]

I have service pack 1 installed, the only currently applicable service pack, along with all the hot-fixes. It isn't corrupting any of my drawings, so for now this is more of an annoyance than an issue.

[cadtag]

Any reference files in use? that seems to be the root cause of that here, (c3d 2014)