Autocad Architectural Test

[jkipfer]

I'm looking for an AutoCAD test geared towards Architecture for potential employees.
I see dozens of posts in the Autodesk discussion groups by others looking for similar, but don't see any answers. The only one I've found is http://www.xlquest.com/

Does anyone know of any others? We're using A2K5.

Thanks,

Jason

[richardtt33978]

.. here's another ...

http://www.tenlinks.com/CAD/USERS/AUTOCAD/TEST.HTM

8-)

[SCROSLEY]

Jason,
I have one that I made utilizing the acad concepts we use most in our Architectural practice. Here is the instructions sheet for the test. After reviewing it, if it is something you may be able to use I can send you the cad files that go with it and you can modify them to your needs.

[jkipfer]

Thanks for the reply. This has given me some ideas.

Jason

[clark.fillinger]

We just looked at this one not long agao, its great. You can easily change the test questions too.

http://www.academix.com/soft_atestpro2x.html

[Chris_G]

Jason, here is a basic one I put together using some common Arch. Practices as well. Basically, I wrote out a quick list of the acad issues that I was concerned if new employees knew. Then I built a small test around it. Let me know if you want the dwg files that go with it.

Chris

[clark.fillinger]

Chris,

Your test looks really good. Thanks for posting.


Can I get a copy of your support files?

[DaneGTrek]

Jason,
I have one that I made utilizing the acad concepts we use most in our Architectural practice. Here is the instructions sheet for the test. After reviewing it, if it is something you may be able to use I can send you the cad files that go with it and you can modify them to your needs.

I would like to utilize this test if you can send or upload the dwg files needed.

dane.garver@me.com