moving stir cut plane and changing visibility underneathe

[vanderloo5]

Should read "Stair cut plane." Unable to change in edit.
I'm trying to remember how to change the cut height on a residential stair run and change the visibility beneath.
My preference is to cut the stairs in the first floor plan at about 7'-0" and have complete visibility of the walls below the stairs. (So the stairs above 7'-0" wouldn't show at all.)
On the second floor plan I would just show going down 3 or 4 risers and then cutting all visibility below that. Tried to change the typo in the post title but unable.
Thanks

[Brian Myers]

It's based on the view range at the stair. If you do not want to change it for the entire plan, you can use a Plan Region and choose the height of the cut plane in the view range for the region.

[marmiketin]

To change visibility of stairs above the cut plane you need to open visibility graphics for your view and expand the stairs section then uncheck all items starting with <Above>. Do the same for railings.