Walls shorter than 2000mm do not display cut patterns

[dvfraess]

Has anyone else come across this issue:
When any wall is shorter than 2000mm the cut patterns do not display in Medium or Fine view.
In the attachment the View Range is 1000mm, there are no overrides on the walls.
I have tried moving the cut plane down to 200mm - no change in the wall display.

[Brian Myers]

This is "expected" software functionality that has been around for a long time. Some people like it, others hate it. But it has been around so long that most people have just grown to accept it.

http://revitclinic.typepad.com/my_weblog/2010/07/cut-behavior-of-low-walls.html

[dvfraess]

Has anyone else come across this issue:
When any wall is shorter than 2000mm the cut patterns do not display in Medium or Fine view.
In the attachment the View Range is 1000mm, there are no overrides on the walls.
I have tried moving the cut plane down to 200mm - no change in the wall display.

Thanks, that's the answer I was I was expecting - I don't like it.

[marmiketin]

Its interesting that article states that the low wall height is set to 6' (1830mm) but in your posted images the 1999mm high wall is showing as a low wall. This wall should still be cut as it is taller than 6'.