Help creating Utility Brick Hatch Pattern

[elmourabtarchi939519]

guys, it's my first time here, could anyone help me with a pattern, i'm struggling since yesterday, Please heeeelp!!! can't do the hatch on Revit,

i used this note but it dosnt work :( *Utility Brick
;%TYPE=MODEL
90, 0,0, 0.00000,28.00000, 4.00000,-20.00000
90, 14,4, 0,28, 4, -20
90, 0,8, 0,28, 4, -20
90, 14,28, 0,28, 4, -20
90, 0,16, 0,28, 4, -20
90, 14,20, 0,28, 4, -20
180.00000, 8.00000,4.00000, 0.00000,24.00000
180.00000, 8.00000,8.00000, 0.00000,24.00000
180.00000, 8.00000,28.00000, 0.00000,24.00000
180.00000, 8.00000,16.00000, 0.00000,24.00000
180.00000, 8.00000,20.00000, 0.00000,24.00000
180, 8,20,0,24
here is what i want:
106218

[hugh.69031]

try:

;-------------------------------------------------------------------------------
; Written by HatchKit for Revit
; HatchKit for Revit (c)1990-2017 Cadro Pty Ltd
; www.hatchkit.com.au/
;-------------------------------------------------------------------------------
;-Date : 2018-03-10
;-Time : 12:38:51
;-HatchKit Version : 3.1.10.2733
;-HatchKit Output Filetype : Revit with HatchKit Add-In
;-------------------------------------------------------------------------------
;%VERSION=3.0
;%UNITS=INCH
*Brick0,RUNNING HORIZONTAL 28"x4" bond=1/2
;%TYPE=MODEL
90,0,0,4,14,4,-4
0,0,0,0,4

hope this helps,

Hugh Adamson