Labels in Grid Bubble not right way up.

[nextvkin]

The drawing I'm trying to create a column grid for has a UCS which is not World. After creating the grids out of linework and going about editing the labels, everything's ok except they are upside down. How do I fix that, anyone? Thanks.
Kay

[dkoch]

How does the UCS vary from the World UCS?

How are you viewing the drawing? Are you in a Plan view of the current UCS or, perhaps the Plan view of the World UCS?

I did an experiment where I started with the World UCS (and viewing the drawing from the Top view direction, in "Plan" view for the World UCS, with the positive X-axis to the right and the positive Y-axis to the top) and then created a custom UCS by rotating the UCS 180 degrees around the Z axis. I then created an Enhanced Custom Grid from linework, and added values to the labels. The labels were upside down, as they were created with the custom UCS current. Using the PLAN command, and selecting the Current ucs option, rotated the view 180 degrees and the labels were right-side up.

[nextvkin]

David,
Just discovered that using Enhanced Custom Grid or Column Grid gives me labels the right way up whatever UCS I'm in (in PLAN view), but using Custom Grid Convert, the labels always follow WCS (in PLAN view).
Kay