PDA

View Full Version : WIPEOUTFRAME w/ PUBLISH COMMAND


agreen740983
2018-12-17, 10:43 PM
My WIPEOUTFRAME setting is '2'.

When I PLOT a single sheet, the wipeout frames do not print.

When I use the PUBLISH command to print several sheets, the wipeout frames print. How can I fix this so my wipeout frames don't show when I PUBLISH?
Tom Beauford
2018-12-18, 12:55 PM
Results vary, try setting it to '0'.
If that doesn't work try setting FRAME to '0'. It will override WIPEOUTFRAME, IMAGEFRAME, PDFFRAME, etc so no frames will display or plot.
agreen740983
2018-12-18, 09:37 PM
unfortunately, I'm still seeing wipeoutframes when using the PUBLISH command even with WIPEOUTFRAME '0' and FRAME '0'
Tom Beauford
2018-12-19, 12:36 PM
Are you Publishing to PDF?
https://knowledge.autodesk.com/support/autocad/troubleshooting/caas/sfdcarticles/sfdcarticles/PDF-created-from-AutoCAD-shows-frames-around-text-in-PDF-viewer.html?_ga=2.54516461.439229710.1545061256-438288348.1539799944

Otherwize there is a workaround at: https://forums.autodesk.com/t5/autocad-lt-forum/image-frames-haunting-drawings/m-p/5507306#M125348

If you find a better solution please share it here, the issue varies from one PC to the next. For the ones in our office switching back and forth between settings of '0' and '2' has always worked.