gsarchitect
2019-10-07, 05:33 PM
Hello,
I have started Revit Architecture 2019 tutorials for a couple of weeks now to revisit what I had learned several years ago. I am in the beginning levels so I may have missed something but here is the issue I have been running into:
Created an exterior wall type, 2 x 6 wood stud, gwb interior, plywood sheathing & wood siding exterior. I used the family editor to Modify and unlock the exterior two layers of sheathing & siding so that I have the ability to them down past the wall base in order to cover 6" of the rim joist and base foundation wall. That works like a charm EXCEPT when I look at the corners in plan and see that the wall join is a butt connection where the edge of one wall is not a finished edge (see attached images). I have tried adjusting the Wrap setting for both walls to no avail.
Please LMK if I am doing something wrong or if this a known Revit issue; if the latter is there a workaround?
Thank you much for anyone that replies!
I have started Revit Architecture 2019 tutorials for a couple of weeks now to revisit what I had learned several years ago. I am in the beginning levels so I may have missed something but here is the issue I have been running into:
Created an exterior wall type, 2 x 6 wood stud, gwb interior, plywood sheathing & wood siding exterior. I used the family editor to Modify and unlock the exterior two layers of sheathing & siding so that I have the ability to them down past the wall base in order to cover 6" of the rim joist and base foundation wall. That works like a charm EXCEPT when I look at the corners in plan and see that the wall join is a butt connection where the edge of one wall is not a finished edge (see attached images). I have tried adjusting the Wrap setting for both walls to no avail.
Please LMK if I am doing something wrong or if this a known Revit issue; if the latter is there a workaround?
Thank you much for anyone that replies!