DaveP
2005-06-13, 05:30 PM
We use a smaller (1/3", which works out to 85/256) Elevation circle for Interior Elevation Tags. When we have a "Sim" label, the word "SIM" often overwrites the Detail number. (See attached)
I've played around with all the Text justifications possible, but no matter what I use, "SIM" still overwrites the Detail number somewhere. If it looks good on a South-pointing bubble, it messes up the North-bubbles.
Are there any other settings that I can try to keep that SIM out of my hair?
I'd be happy to use two different symbols, but I the Options Bar only lets me pick Elevation: Interior or Exterior, not a specific Tag.
I should mention, too that our building is at 10 degrees, so none of these Tags are straight up & down. The arrow points at 10 degrees, but the SIM seems to stay in the same place.
TIA
DaveP
I've played around with all the Text justifications possible, but no matter what I use, "SIM" still overwrites the Detail number somewhere. If it looks good on a South-pointing bubble, it messes up the North-bubbles.
Are there any other settings that I can try to keep that SIM out of my hair?
I'd be happy to use two different symbols, but I the Options Bar only lets me pick Elevation: Interior or Exterior, not a specific Tag.
I should mention, too that our building is at 10 degrees, so none of these Tags are straight up & down. The arrow points at 10 degrees, but the SIM seems to stay in the same place.
TIA
DaveP