Sheet Pile linetype

[awiebe]

Hey All
I have a engineer here that wants us to develope a custom linetype. No problem cept it is of sheet pile looks like this _/-\_. Not exactly but I need help with the angled lines. Of course he wants this sept 6th. Wish I could give you hard working creative folks a prize but I can't. Please help
Thanks
still on Acad 2002 land Desktop
Arne

[Mike.Perry]

Hi

Look at creating a Shape file (.SHP) that represents the "Sheet Pile" profile you are after, then plug the Shape file into a complex Linetype.

Have a good one, Mike

[enoliad]

contact me for more information

[Tom Beauford]

Try

*SHEETPILE,Sheetpile _/-\_/-\_/-\_/-\_/-\_/-\_/-\_
A,.0001,-1,[TRACK1,ltypeshp.shx,r=45,x=-.2,y=0],-1,[TRACK1,ltypeshp.shx,r=90,y=-.7,s=.5],-1,[TRACK1,ltypeshp.shx,r=135,x=.2,y=0],-1.4,[TRACK1,ltypeshp.shx,r=90,y=.7,s=.5],-.4

[adii]

Do you serve as a reference?

;;
;; Unit : Millimeter
;; LTScale = 500
;;
;; JIS A 5523 / JIS A 5528
;; JFE-steel Sheet Piling
;;

*JFESP-2, Sheetpile (LTScale=500)
A,0,-.02679,[TRACK1,ltypeshp,s=.10353,r=-15,y=.1],-.37321,[TRACK1,ltypeshp,s=.34641,r=90,y=.2],-.4,[TRACK1,ltypeshp,s=.20706,r=15],-.4,[TRACK1,ltypeshp,s=.34641,r=90,y=-.2],-.37321,[TRACK1,ltypeshp,s=.10353,r=-15,y=-.1],-.02679

*JFESP-3, Sheetpile (LTScale=500)
A,0,-.03349,[TRACK1,ltypeshp,s=.12941,r=-15,y=.125],-.36651,[TRACK1,ltypeshp,s=.33301,r=90,y=.25],-.4,[TRACK1,ltypeshp,s=.25882,r=15],-.4,[TRACK1,ltypeshp,s=.33301,r=90,y=-.25],-.36651,[TRACK1,ltypeshp,s=.12941,r=-15,y=-.125],-.03349

*JFESP-4, Sheetpile (LTScale=500)
A,0,-.02998,[TRACK1,ltypeshp,s=.17262,r=-10,y=.17],-.37002,[TRACK1,ltypeshp,s=.34005,r=90,y=.34],-.4,[TRACK1,ltypeshp,s=.34525,r=10],-.4,[TRACK1,ltypeshp,s=.34005,r=90,y=-.34],-.37002,[TRACK1,ltypeshp,s=.17262,r=-10,y=-.17],-.02998

*JFESP-5L, Sheetpile (LTScale=500)
A,0,-.07279,[TRACK1,ltypeshp,s=.21284,r=-20,y=.2],-.42721,[TRACK1,ltypeshp,s=.35441,r=90,y=.4],-.5,[TRACK1,ltypeshp,s=.42567,r=20],-.5,[TRACK1,ltypeshp,s=.35441,r=90,y=-.4],-.42721,[TRACK1,ltypeshp,s=.21284,r=-20,y=-.2],-.07279

*JFESP-6L, Sheetpile (LTScale=500)
A,0,-.08189,[TRACK1,ltypeshp,s=.23944,r=-20,y=.225],-.41811,[TRACK1,ltypeshp,s=.33621,r=90,y=.45],-.5,[TRACK1,ltypeshp,s=.47888,r=20],-.5,[TRACK1,ltypeshp,s=.33621,r=90,y=-.45],-.41811,[TRACK1,ltypeshp,s=.23944,r=-20,y=-.225],-.08189

*JFESP-2W, Sheetpile (LTScale=500)
A,0,-.07506,[TRACK1,ltypeshp,s=.15011,r=-30,y=.13],-.52494,[TRACK1,ltypeshp,s=.44989,r=90,y=.26],-.6,[TRACK1,ltypeshp,s=.30022,r=30],-.6,[TRACK1,ltypeshp,s=.44989,r=90,y=-.26],-.52494,[TRACK1,ltypeshp,s=.15011,r=-30,y=-.13],-.07506

*JFESP-3W, Sheetpile (LTScale=500)
A,0,-.08394,[TRACK1,ltypeshp,s=.19861,r=-25,y=.18],-.51606,[TRACK1,ltypeshp,s=.43213,r=90,y=.36],-.6,[TRACK1,ltypeshp,s=.39722,r=25],-.6,[TRACK1,ltypeshp,s=.43213,r=90,y=-.36],-.51606,[TRACK1,ltypeshp,s=.19861,r=-25,y=-.18],-.08394

*JFESP-4W, Sheetpile (LTScale=500)
A,0,-.09792,[TRACK1,ltypeshp,s=.23171,r=-25,y=.21],-.50208,[TRACK1,ltypeshp,s=.40415,r=90,y=.42],-.6,[TRACK1,ltypeshp,s=.46342,r=25],-.6,[TRACK1,ltypeshp,s=.40415,r=90,y=-.42],-.50208,[TRACK1,ltypeshp,s=.23171,r=-25,y=-.21],-.09792

[adii]

Inch uses the floating point number.

;; Unit : Inch
;; LTScale = 500

*JFESP-2, Sheetpile (LTScale=500)
A,0,-1055e-6,[TRACK1,ltypeshp,s=4076e-6,r=-15,y=3937e-6],-14693e-6,[TRACK1,ltypeshp,s=13638e-6,r=90,y=7874e-6],-15748e-6,[TRACK1,ltypeshp,s=8152e-6,r=15],-15748e-6,[TRACK1,ltypeshp,s=13638e-6,r=90,y=-7874e-6],-14693e-6,[TRACK1,ltypeshp,s=4076e-6,r=-15,y=-3937e-6],-1055e-6