Aligning Multiple VIews on Multiple Sheets

[d.stairmand]

I have got approx 10 Floor Plans made up & want to Place them on Multiple Sheets.
Placing 1 view on 1 sheet is alright, but i want the next Sheet & floor plan to sit in the same position as the previous - so that i can manually overlay the Plotted sheets & they align up

any suggestions on how to go about this?

Dwane Stairmand

[beegee]

Make a sheet with setout lines / crosshairs or whatever is needed.

Align views on each sheet using these guides.

Swap out these ""aligning sheets '" with the standard sheets, or else use a visibility parameter to turn off the align lines.

[Shaun v Rooyen]

I use the "Work Plane Visibility" in the title block view. By turning this on I have a common grid to work to, thru' all title blocks. You still have to wing it slightly, by moving a corner of the building to a grid intersection.

[d.stairmand]

Cheers Guys for the response's
I have a go at doing bath ways

Dwane Stairmand

[beegee]

Nice tip Zeds !

( Scott, you listenin'? )


I use the "Work Plane Visibility" in the title block view. By turning this on I have a common grid to work to, thru' all title blocks. You still have to wing it slightly, by moving a corner of the building to a grid intersection.

[Scott D Davis]

Zzzzz......Huh? What? What was that?