Headers in Roof Framing Plan

[ford347]

I would like to see my window and door openings in my roof framing plan. I need to see these so when I do my struc calcs for footings etc, I can see what loads are sitting on headers, etc.. I have read some threads, did some research, messed around with the view depth and can't seem to find a good way of doing this. Could someone give me some advise? Thank you

[E-Key]

Could you place an example file into forum.

[jcoe]

If you want to see the information for structural calcs, I would first duplicate the roof framing plan, go to view properties and use the underlay feature to underlay your floor plan. The underlay will show the location of your openings.

[E-Key]

I would like to see my window and door openings in my roof framing plan.
1. Open View Properties dialog window and set Model Graphics Style to "Wireframe".
2. Then go to View Range "Edit..." button and set in View Depth category the lowest level of your model you want to see.
3. Close View Range window
4. Close View Properties window.