Wall Niches

[rodneyf]

I know I have seen a "how to" on creating a niche in a wall, I just can not find it. So if someone would be so kind as to point me in the right direction that would be great.

Thanks,

[Steve_Stafford]

By all means, learn how, but there are a few families at RUGI that you can download first...window category if I remember correctly.

[jbalding48677]

I put up two niches on RUGI. They are under windows called arched top art niche the other is flat top art niche. They are parametric in height, width and depth.

http://www.rugi.org/cgi-bin/windowsexch.pl

[rodneyf]

Thanks guys I knew I had seen them before. 8) If I also remember correctly isn't there a tutorial or something along that nature from Revit. I will dive just a little deeper and see what I find.

Thanks,

[rodneyf]

There is a FAQ on the Revit site that explains how to create an in-place family by using a Void. Here is the link the wonderful people at Revit support sent me.

http://revit.autodesk.com/pillar/custserv/web/service/support_4.0/faq/Cut_Mass/2_cut_mass.asp

Thanks,