update sheets sets?

[nil13]

Ok this is what I am trying to do. It seems like it should be easy. I have a project with a bunch of sheets in the sheet set. I need to update the title block with new project information, for instance new owner and project address information. New sheets have to proper information, it's the old sheets that I can't figure out how to update.

Any help would be greatly appreciated,

Shawn

[Steve_Bennett]

Please note that I'm moving this over the the AutoCAD Sheet Sets Forum as I feel that you'll get a better response there. I know you are using ADT, but once you get into sheet sets, they are the same thing as what vanilla AutoCAD uses - especially the title blocks.

[Mike.Perry]

Any help would be greatly appreciatedHi

For starters try searching (http://forums.augi.com/search.php?) this forum (http://forums.augi.com/forumdisplay.php?f=52) using the below search criteria...

Key Word(s): Update

Have a good one, Mike

[paltd]

Ok this is what I am trying to do. It seems like it should be easy. I have a project with a bunch of sheets in the sheet set. I need to update the title block with new project information, for instance new owner and project address information. New sheets have to proper information, it's the old sheets that I can't figure out how to update.

Any help would be greatly appreciated,

Shawn
Shawn, Verify the field setting it may be you have to change them. also i have noted that if you have the sheet # field set to the current sheet # & the sheet title field set to the current sheet title. you can then copy one title block to the clip board and insert it onto the ones that you want to change and erase the old one. that seems to be the simplest. other wise you have to go through and change each individual one. But definitely ensure that the fields are set correctly on the title block.