Floor Edge

[beboyle]

I did a search and couldn't find an answer to this. Is there a way to chamfer the edge of the floor in the attached Pic so it does not protrude through the roof?

Thanks,
Brian

[beegee]

You could use a white filled region and linework to achieve that. ( For detailing purposes only )

Or you could use an in place void to cut/chamfer the floor.

[christo4robin]

Another option would be to open the floor sketch, offset inward say a foot or so on the offending edges, then apply a sweep to the floor (Modelling > Sweep > Floor or something like that) using a profile you create that includes the chamfered edge.

Cheers!

[beegee]

Or, you could use "Edit Cut Profile" for the floor.

[christo4robin]

Edit cut profile is only a 2d fix - correct?

[beegee]

Edit cut profile is only a 2d fix - correct?

That's right. Just use it for detail views.

[beboyle]

Thanks Chris, Beegee,

Needed the 3d approach, pull back edge and add a sweep.

Brian

[sbrown]

You could use the hosted slab edge profile, just hold your slab back the chambfer distance then add the profile you want and join together. Pretty simple actually.