Breaklines

[captainbunsaver]

Hi All;

I did a search looking for this problem, but came up empty (If I need to refine my search methods, please tell me how).

When I use a break line, a little bit of the model still shows. I have to leave the model visibillty on to see mainframes and other structure.

Any ideas?

Thanks

TC

[Chirag Mistry]

Did you try using bring to front or send to back ? Select the breakline and on the options bar you will see a bunch of buttons for this. Hope this helps

[captainbunsaver]

Man, I wish it had been that simple. Tried it, printed, still the same. I'm baffled (puzzled that is).

TC

[sfaust]

maybe some screenshots would help diagnose...

[captainbunsaver]

Okay, here's a shot of the three views on the sheet. The bottom of the top view shows fine even in this view, but all three print with just a smidgen of the break area showing.

TC

[cphubb]

Have you tried extending the white fill out away from the model a little? We always extend the fill beyond the edge of the crop region. The easy way to do this is:

Pull the break back a little to see the end control of the fill
Pull the control toward the crop boundary until it stops
Move the break till the fill extends outside the crop boundary

Try that. It works well for us.

BTW We have noticed some ghosting of objects below the break line fill in the display. They do not print. Not the exact problem you are having but close.