Looking for a parametric folding partition

[Tibor]

Does anyone have a parametric folding partition family? It needs to span openings between 20 and 32 ft. Couldn't find anything on RUGI, Revitcity or this forum; and I am not sure how to create the family -- it needs to increase the number of panels every 4 ft. or so.

Thanks in advance.

[Dimitri Harvalias]

Do you need to model this or just show it in plan?
Unless showing how much room is required to stack panels is an issue, I tend to just show this type of partition as a simple accordian (?) graphic at one end with a dashed line showing the extent of the folding partition.

[Tibor]

Thanks, Dimitri.
I really would have preferred to show an interior perspective of this area with some level of accuracy. For now, I'll do it as you suggest, and perhaps add an in-place family for the perspective.

[jbalding48677]

I have one that will work for you. Unfortunetly, it is on a server that is down right now for service.

BTW, it will calc the stacking required, number of panels and a couple of other items. It is metric, but can be converted pretty easily.

[jbalding48677]

OK, server is back on line. Try these:

No guarantees though.

[Dimitri Harvalias]

Nice Jim :)

[Tibor]

Thanks, Jim - exactly what I needed.

[jbalding48677]

Good deal, glad I could be of service...

[ejburrell67787]

Hey I was just searching for some folding partitions! :razz:

Thanks Jim, much appreciated!! :)

[zenomail105021]

Thanks Jim.

Bill Maddox
Maddox Builders, Inc.