How to properly crop Interior elevations?

[jwilhelm]

Any tips on properly cropping interior elevations? The cropping window is rectangular. How do I crop casework or soffits for example? Irregular viewports would certainly be helpful for this. I suppose a filled region with a hole in it could work but this seems like a lot of extra work

[aggockel50321]

One way.

Callouts (rectangular) of the areas in question on the elevation.

When placed on a sheet they'll refer back properly.

You can then turn off things (walls, windows, etc) that you don't want to see in the view.

[Scott Hopkins]

Jerry,

No really perfect way to do it. You may check out this post for some discussion on the issue...

http://www.zoogdesign.com/forums/phpBB2/viewtopic.php?t=2732&highlight=interior+elevations

[studio3p]

The filled region with a hole(s) in it is the method I use. It does take a few minutes to setup on a complex elevation, but I have to say I'm very happy with the graphic results.

[christo4robin]

I use the donut shaped filled region also. I combine it with a break line (detail component) if one side of the elevation does not have a wall (partially elevated hallway for instance)