1/3 bond utility brick

[RHarvey.70699]

Does anyone have a fill pattern for 1/3 bond utility brick? I am not having much luck at creating one or finding one posted.

[J. Grouchy]

*Utility Brick, Third Run
;%TYPE=MODEL
0,0,0,0,4
90,4,0,0,12,4,-8
90,8,4,0,12,4,-8
90,12,8,0,12,4,-8

Save as a .PAT file and import via model patterns.

[RHarvey.70699]

Thanks a bunch!!!!!! It works great.

[jplummer]

Does anyone have a 1/2 running bond utility brick fill pattern?

[pcore]

I am looking for this pattern as well, would anyone mind posting it? Thanks for any help you can offer.

[SkiSouth]

Post an image. Are you wanting a continuous 1/2 brick fill, or a flemish bond etc.?

[pcore]

Actually I just figured it out. Copying and pasting the code into an existing .pat file worked (I don't have autocad unfortunately). Thanks, though.

[hugh.69031]

for jplummer:

*UB2, Half Run bond utility brick
;%TYPE=MODEL
0,0,0,0,4
90,0,0,4,6,4,-4


Hugh Adamson
www.cadro.com.au/hatchkit/ (http://www.cadro.com.au/hatchkit/)

[Haden]

Actually I just figured it out. Copying and pasting the code into an existing .pat file worked (I don't have autocad unfortunately). Thanks, though.

Actually, based on your image, you all have not been using the correct pattern for 1/3 Bond, or "1/3 Running Bond." This is an image from the Brick Industry Association Tech Notes #30, which shows that the 1/3 shift just goes back and forth, rather than continuing up course by course in the same direction. (This is what masons in the U.S. follow.):
http://forums.augi.com/attachment.php?attachmentid=102636&stc=1