Fillet Radius

[raddis]

Is there a way to Fillet two lines to create a radius?
I know you can "Trim" them to create a 90 degree corner, but I want to create a 1/4" radius in one of may family details.

I can draw the ARC but it seems a bit primitive to find the center, then the two end points when fillet - 1/4" radius would do the trick more quickly and accurately.

[aggockel50321]

Yes it's there as an option under the line drawing tool, not a standalone tool.

[ejburrell67787]

Certainly is! Use the fillet with radius option. You might need to use "click for more sketching options" next to the line / rectangle etc buttons on the options bar, but it is there and you can set the radius you want.

[raddis]

Thanks!
Ah yes, the old "Fillet Arc" option ;)

[desiree.ball]

Has anyone had the problem with the fillet command that it is not working when they first chose the line to fillet. In our office we are having to pick the first line twice to get it to work. I am not sure if this is an issue with Autocad 2007 or just us.

[ejburrell67787]

Has anyone had the problem with the fillet command that it is not working when they first chose the line to fillet. In our office we are having to pick the first line twice to get it to work. I am not sure if this is an issue with Autocad 2007 or just us.If it's AutoCAD you have a question about you're in the wrong forum! :mrgreen: Head over this (http://forums.augi.com/forumdisplay.php?f=176)way...!