Angled column line not viewing in elevation

[petervanko]

I have an angled wall that has column line "C" parallel to it, and when I go into an elevation view perpendicular to the "square" walls, column line "C" does not appear.

[greg.mcdowell]

That's the way it's supposed to work... if you need it you'll have to draw it in with lines.

[petervanko]

Hmmm. Ignoring columns on non-perpendicular column lines is certainly not a convention I have ever used before in my career. Thanks, though.

[Scott D Davis]

Hmmm. Ignoring columns on non-perpendicular column lines is certainly not a convention I have ever used before in my career. Thanks, though.
Problem is: B to C on one side is not the same as B to C on the other side. That could get confusing. Contractor: "Says right here that is supposed to be 20'-0"" Architect: "Thats the wrong side of the building. C is only 15'-0' from B on this side!"

That condition should really be two separate orthangonal grids, C1 for one column, and C2 for the other, so they can be dimensioned properly.