Walls dont clean up in Revit

[roula]

I have attached a project that i am working on. It is of wood construction but my walls refuse to clean up especially at the sides. I have clouded the areas in quesiton, on east and west elevation and south elevation. Also look at floor plan and low window head where the wall turns.

Please take a look at model and let me know if i am doing things wrong.

thanks

[Dimitri Harvalias]

roula,

please post the image and/or file so we can give you a hand.

PS. Not sure if the Gallery is the correct forum either, but we'll leave that up the mods.

[roula]

I have attached the model, thanks

[Baldwin_4-6-0]

I just pulled your walls back in plan then moved them back and it cleaned up.
And I moved your reference plane on the left side

[roula]

That is great but it didnt clean up the side walls. Look at the low window head.

[Baldwin_4-6-0]

You are on the right track, you just need to work on your technique a bit, try to use attach to roof coomand rather than the edit profile. And try the join geometry tool, sometimes that is helpful.

Also check your review warnings, under Tools>Review Warnings.
You have walls on top of walls, that will definately cause some problems.