rgesner
2006-09-01, 05:27 PM
See the attached ZIP file for the buggy RVT file.
The curtain wall and doors in this file were cut-and-pasted from a real project in which four doors on level 1 are showing up in the level 2 door schedule for no apparent reason. According to the schedule's level field and filter, they exist on level 2. Only these four doors were affected - all other doors do appear in the correct schedule.
The only strange bit of history is that at the time the doors and schedule were first created, the host curtain wall's Base Constraint was set to Level 2 and the Base Offset was set to negative 13'6, but changing the Base Constraint to Level 1 and the Base Offset to 0 didn't fix the problem.
Can anyone figure out why and how to fix it.
Thanks - Rusty
The curtain wall and doors in this file were cut-and-pasted from a real project in which four doors on level 1 are showing up in the level 2 door schedule for no apparent reason. According to the schedule's level field and filter, they exist on level 2. Only these four doors were affected - all other doors do appear in the correct schedule.
The only strange bit of history is that at the time the doors and schedule were first created, the host curtain wall's Base Constraint was set to Level 2 and the Base Offset was set to negative 13'6, but changing the Base Constraint to Level 1 and the Base Offset to 0 didn't fix the problem.
Can anyone figure out why and how to fix it.
Thanks - Rusty