Steve Jager
2006-11-30, 06:45 PM
Someone try this please.
Draw four walls default 20 ft, put in a switch back stair w/doors top and bottom and exit door at landing. Use Plan Region for this door, set visibility as needed to see it and make sure it overlaps stairway. It screws up the stair and now shows up/dn break instead of just down.
I want to exit at middle landing and only wnat to show the dwon direction not both. Are we doing this right or is there some magic view range setting that we need here? Also, if you have a floor at the top and have a handrail along the wall, the railing will not be cut by the floor.
Play with the plan region location and you will see what we mean.
Thanks.
Draw four walls default 20 ft, put in a switch back stair w/doors top and bottom and exit door at landing. Use Plan Region for this door, set visibility as needed to see it and make sure it overlaps stairway. It screws up the stair and now shows up/dn break instead of just down.
I want to exit at middle landing and only wnat to show the dwon direction not both. Are we doing this right or is there some magic view range setting that we need here? Also, if you have a floor at the top and have a handrail along the wall, the railing will not be cut by the floor.
Play with the plan region location and you will see what we mean.
Thanks.