Raster image in Table cell does not Plot

[costas.vassiliou]

Hi there,

I am using ACAD 7. After I insert a raster image in my drawing, I convert it into block.
Then, having set up a table, I insert it as a block in a cell in the table.
When I print I only gat a square, it seems to me to be the frame of the image, and not the image !

Does anyone know why this is happening ?

[lmitsou]

Hi there,

I am using ACAD 7. After I insert a raster image in my drawing, I convert it into block.
Then, having set up a table, I insert it as a block in a cell in the table.
When I print I only gat a square, it seems to me to be the frame of the image, and not the image !

Does anyone know why this is happening ?
Geia sou Costa,

Have you checked if the option to show the image is set to "YES"? You can do that by double clicking on your block and then open it. Click on the frame of the image and go to properties. At the bottom you will find a switch "Show Image". This should be "Yes".

Also, maybe it would be a good idea to check if the layer the image is on is printable or not (go to Layer Manager and have a look at the printer icon).

Let us know if it worked.

Thanks,

[costas.vassiliou]

Gia sou Mitsou (soory I do not know your first name)

I have check those you say and it is OK.

The issue is that I have the same block image in the dwg and the same block image in a cell table.
The one in dwg is printed but the one in cell does not !