View Full Version : Wall Wrap Question
Can someone help me with the proper settings to wrap the drywall at the intersection so that it doesn't appear that one wall tees into the other. I have tried various combinations of interior and exterior wrap settings with no change in appearence. Please see the attached.
Thanks for the help!
bowlingbrad
2007-02-05, 08:53 PM
Can you please cut and paste those two walls to an empty project and post it?
Here is a revit copy.
Thanks for the help!
Actually here is the revit file!
ford347
2007-02-06, 12:36 AM
Right off the bat, check your two walls and make sure they have the same functions assigned to the drywall layer, i.e. finish(4) for drywall. this is how revit interprets how you want a wall to join to another wall.
Josh
Oh, and your revit attachment is not showing up.
Josh,
They are both simple 2X4 walls with drywall on each side.
Here is another attempt at attaching the file.
Thanks
bowlingbrad
2007-02-06, 01:01 PM
the materials are all defined as Structure. Set the drywall to finish (and maybe place them outside of the core boundaries). Everything should join properly now.
ford347
2007-02-06, 02:31 PM
Here are some illustrations of what Brad is saying. Hope this helps.
Josh
bowlingbrad
2007-02-06, 03:24 PM
Thanks, Joshua!
ford347
2007-02-06, 05:14 PM
no problem at all. thanks.
Josh
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.