Shaded with Edges Display Problem

[bnichols]

Some of the edges in a "shaded w/ edges" 3D view are not displaying - actually they are displaying, but a muted grey, almost like half-tone is selected. Other walls of the exact same type are displaying properly. In addition to the edges the faulty walls won't display color (I switched them to a brick wall and the pattern displays but the red color does not).

I've attached a jpeg where you can see the problem.

Any ideas?

Thanks

[mibzim]

Are the other walls in another phase? Check the element properties.

[Nelsonnc24]

If you are working with design options,the walls which do not show edges whilst in shading with edges mode could be in a different design option set than the option you are currently editing.

[bnichols]

Thanks. That was it. I've never worked with phases before, but somehow the second level view was set to a later phase.

[mibzim]

Sometimes views get set to be in a particular phase and it doesn't get noticed, but everything drawn in that view will automatically be placed in that phase.