Gutter joining on different roofs...

[cchollet]

Please help; i have 2 roofs joined but when i do the gutters they dont join or cut where the roofs join, any idea how to fix this ??

[whittendesigns]

your gutter will follow the edge of your roof to the end. your roof probably continues inside of the building. what you may have to do is edit your roofs lines to follow the valleys. in plan view, use a reference plane and pick the valley line. edit both roofs to the valley line and it should clean up from that point.

if you have already done this it could be that your roofs elevations are ever so slightly off.

another easy way to do gutters/fascia is to use a model line at a certain reference level that matches your sweep height. simply draw your lines around the edge of your roofs edge, then use the gutter sweep on the lines instead of your roof edge.