Earth line

[bgauthier]

Hi everyone.
I don't know if this was in a previous thread but I'll ask anyway. I need to know how I can show my earth line to be a thick one on the elevations.

Thanks

[Mike Sealander]

Try by accessing View Properties, Visibility, Model elements, Topography, Cut line (or something like that), and override the cut line to a big number.

[dhurtubise]

Try by accessing View Properties, Visibility, Model elements, Topography, Cut line (or something like that), and override the cut line to a big number.
There is no such thing, use linework

[muttlieb]

There is no such thing, use linework
Visibility Graphics > Object Styles > Topography. Modify Cut Line Weight.

[captainbunsaver]

I think what Mike meant is to use the Settings-->Object Styles-->Topography and under LIneweight/Cut, change that to a larger number for a section to show a thicker linewieght, or change LIneweight/Profile for an elevation change to topo lineweight.

This assumes that topo has been placed into the project.


TC

[douggodfrey]

Settings|Site Settings| Turn off section cut material, Set poche depth to 1"

[bgauthier]

Thank you but nothing seems to work. You can't even use the linework tool. Maybe I'm doing something wrong.

[bgauthier]

The poche base at1" works for the section only. Elevations are the problem.

[muttlieb]

The poche base at1" works for the section only. Elevations are the problem.
Check to make sure the Topography category is visible in your elevation view.

[bgauthier]

Yes, it's visible.

[muttlieb]

Yes, it's visible.
And you can see the Topo surface in the elevation view, i.e., you can select it in the elevation view? Is your Elevation clip plane cutting the topo?

[bgauthier]

Thanks, it did work. You were right, I had to move my elevation line.