Family Model Transparency

[Firmso]

Hi, I have a Generic Model family with material set to 100% transparency. Everything is perfect. The problem is when I load the family into my project, nothing is visible behind the model. What do I need to do to make them visible?
I have gone thru Visibility/Graphics... in my project but no positive results.

Thanks in advance.

Edit: I decided to attach the rfa file.

[cphubb]

Check the object style settings in the project file. It will override the family material setting. If you cannot get it to work, try setting the material using a material parameter in the family

[aaronrumple]

Hi, I have a Generic Model family with material set to 100% transparency. Everything is perfect. The problem is when I load the family into my project, nothing is visible behind the model. What do I need to do to make them visible?
I have gone thru Visibility/Graphics... in my project but no positive results.

Thanks in advance.

Edit: I decided to attach the rfa file.
It will never be transparent in a 2D elevation view. Just as you can't see through glass in a 2D view. You will be able to see through in a 3D projected view.

You have a few choices. Set the object to a subcategory that can be turned off in the 2D view. Of course the hatching will not be visible either - so this would have to be drafted in on the view using a filled region with a transparent pattern.

The object you are drawing could more easily be drawn using a curtain wall. Is there a reason you want it to be a generic model?