Mlabell
2007-03-06, 09:19 PM
Dyn San Pro is a dynamic block meant to reduce the drafting time fiddling with profiles, and as builting (as-built layer built into block so no more copying text and moving around). Also another main purpose of the block is to reinforce the same look across all profiles in all projects, regardless of the person drafting them. The insert point of this block is the rim grade. From there a drafter would size the downstream pipe (left side), then grip the invert of the downstream side to the desired elevation. Then the drafter would use the grips on the right side (upstream) to size the pipe. I couldn't get an auto size like the downstream to work. Too complicated from a creation standpoint. There are some fine tuning grips as well, a manhole size grip located on the base of the manhole, which also automatically changes the text in the structure type. Sanitary labels on/off by the MH number. A stretch grip to move the sanitary information lower(grip located above inverts. A flip which flips the downstream from left to right. For the rim leader there are two grips, a flip which only flips the label and not the manhole, and a regular stretch grip to move the leader wherever needed.