Elevation Markers on Enlarged Plans

[markusb]

In 9.1 is there anyway to create elevations either on an Enlarged Plan or make them show up if they are created on the master plan that the enlarged plan is referencing? I cannot do either and I do not understand why.

Thanks for your help,
markus

[sbrown]

They should show up automatically if the view cuts through the elevation extents and the elevation is NOT set to hide a views courser than the view you are in(thats my guess is your issue. so check the elevation properties and see if its set to hide at scales courser than the plan you are trying to see them on. If thats not it. then you can always place an elevation and check the ref. other view box and chose the view you want to ref.

[markusb]

The elevation marker is set to show up in the visual graphics box and in the level of scale. The elevation is definitely occuring in the area the plan is showing. And, in the enlarged plan there is no option to place an elevation, it is grayed out.

[aaronrumple]

You created a detail rather than a floor plan view.
You cannot place elevation symbols in a detail view.