View Full Version : Visiblity of families
mmenendez
2007-05-15, 01:35 PM
I've got this condition where I've placed a locker right next to a wall. When this area is printed the locker cuts into the line weight of the wall. Is there something that I'm missing in this locker Family that I need to turn off? Thanks in advance!
Revitator
2007-05-15, 02:27 PM
Is the locker a Detail Component family? If it is, you might get a better result by using a Furniture Family template instead.
affdesco
2007-05-16, 01:36 AM
It looks clear to me. but... try the alignent tool.. you may have layers in your wall and the two apparently misaligned lockers may be attaching to a subsurface of the wall. with the alignment tool in a higher scale view you will see the actual layer you are aligning to. I am guessing those two are attached to the core and the others to drywall or ?... you can always align the two to the front of the other lockers.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.