inventor.wishlist1738
2007-06-01, 02:21 AM
Summary: Be abl eto use conditional parameters for filling of tables, title blocks, etc.
Description: We should be able to use parameters together simple conditions and formating within Prompted Entries, titleblocks and general tables, etc.
How Used: For example, being able to put "IF {Parameter\Thickness} THEN Thickness,0"mm"; IF {Style\Material\Steel, Mild} THEN "M/STEEL"; IF {Parameter\Thickness}<3,000 THEN "SHEET"; IF {Parameter\Thickness}>=3,000 THEN "PLATE"." This would check to see if the parameter "Thickness" existed and if it did the value would be printed (including "mm") with accuracy zero - nothing after the decimal marker - it would also check the Material and if it was "Steel, Mild" it would print "M/STEEL" and if the the Thickness was less than 3mm it would print "SHEET or if it were more than or equal 3mm it would print "PLATE".
Feature Affinity: Drawing Manager
Submitted By: Duncan Anderson on April 23, 2007
Description: We should be able to use parameters together simple conditions and formating within Prompted Entries, titleblocks and general tables, etc.
How Used: For example, being able to put "IF {Parameter\Thickness} THEN Thickness,0"mm"; IF {Style\Material\Steel, Mild} THEN "M/STEEL"; IF {Parameter\Thickness}<3,000 THEN "SHEET"; IF {Parameter\Thickness}>=3,000 THEN "PLATE"." This would check to see if the parameter "Thickness" existed and if it did the value would be printed (including "mm") with accuracy zero - nothing after the decimal marker - it would also check the Material and if it was "Steel, Mild" it would print "M/STEEL" and if the the Thickness was less than 3mm it would print "SHEET or if it were more than or equal 3mm it would print "PLATE".
Feature Affinity: Drawing Manager
Submitted By: Duncan Anderson on April 23, 2007