wall sweeps when breaking up walls

[a.murphy]

I have stacked walls in my project that contain wall sweeps, however these walls are not joining nicely with adjacent walls. I tried everything under the sun to make this work and it is a huge pain. When i broke up the stacked walls containing the sweeps to assist in joining, the sweep flipped to the inside and I cant flip it back to the exterior. It looks right in the wall properties, but not in when applied in the building. Any help would be greatly appreciated... Thanks!

[Firmso]

Have you tried flipping the wall?

[Brockway]

Are the wall sweeps built into the wall type or are you applying them after placing the walls? I would suggest making the wall type and NOT have the sweep built in and then applying the sweep after placing the wall. IMO the more you build into the wall type the more likely Revit will have a problem joining up the walls.

[a.murphy]

Yes I tried flipping the wall, but it flips all of the compenents and puts the brick on the inside. The sweep is built into the wall type, Ill try and remove it and apply it individually, but the sweep goes all the way around the building and I am afraid of what changing the wall type might do to all of the other joins... I am having alot of trouble with them in this project.