Floating railing

[ledis_nomad1817]

I'm having a lot of trouble with these railings (see image). They start correctly, go up the stair correctly, but then don't work on the second landing. I've tried what usually works for me - editing the railing and extending/adding a line beyond the bottom and/or top. No dice. Any suggestions?

NOTE: These stairs are not multi-story, but the first and third are the same as are the second and fourth.

[wearethestones]

To correct the floating railing you must make an "end" or "start" baluster and adjust the height to the floor....If that doesnt work try and adjusting the "base offset" dimension. and changing the "base" host in the "edit baluster placement" dialog

You also might try to edit the stair properties. Change for the stair to end with a riser or a tread...see which works out for you.

[SkiSouth]

Looks like you have the stair beginning with a riser and ending with a tread (which should add riser height to the top tread for the rail). Try beginning and ending with a riser. Its in the stair properties.