Show stair path up from cut level

[kevin.bell.72378]

Description: Show the stair path going up in all situations

How Used: Our office standard (and the English standard I believe) is to always show the stair path going up (not down). This works fine except when the stairs are from below to the current floor level - in this case the stairs are shown from the cut to the top and a path arrow will not show.

This means that we have to draw the path arrow in by hand.

Feature Affinity: Stairs

[H-Angus]

Can you post an example of what you mean. Unless I'm misunderstanding your description you can do that already by setting the display properties accordingly.

[kevin.bell.72378]

Can you post an example of what you mean. Unless I'm misunderstanding your description you can do that already by setting the display properties accordingly.

See Attached.

This is an extract from the First Floor plan, with the Ground Floor Stair construct XREFfed in (using the PN).

This means that at first floor you will see the stairs coming up from the ground floor.

The red drawn in arrow is that I would like to see (we always show the arrow going up.

It would be great if you could get this to work!