wrapping wall finish at wall profile edits

[jhawk98]

I have created a wall with a series of arched openings cut into it with the edit profile tool. The wall is brick and I would like the brick to wrap the sides of each of the openings. Fiddling with the wrap at end/wrap at insert boxes does not wrap each individual opening, it will only wrap at each end of the entire wall. Help?

[Dimitri Harvalias]

Welcome to the forums Brandon.
Wall wraps will only work if the 'opening' is a door or window family placed in the wall, and that family needs to have a ref plane defined as a wall closure. A sketched opening is not considered an 'insert'.
So you have a couple of choices;
1 - create the opening as a door or window family that has nothing in it but the void cutting the desired shape or
2 - use the paint tool and just apply the surface pattern to the wall faces that don't have them.

Option 1 will require that you filter the door or window schedule to make sure you don't get extras for the openings.