PDA

View Full Version : Elevation / Section Tag Bug



ErichB
2008-02-18, 09:02 PM
We are running into a glitch with our elevation tag and our section tags in one particular project. They were working fine last week.

Attached is an example of the elevation tag problem. From working directly in the elevation view (shown in the attached jpeg) I tried to place a door. I get an error warning that none of the objects created are visible in that view. So I go looking for my door only to find it on the opposite side of my project and opposite of where my view is facing.

This is happening with both our elevation tags and sections tags. Strange thing is that it is only happening with tags that are facing to the right, regardless of where the tag is placed throughout the project. I run into problems hosting families into any view facing right.

NKramer
2008-02-18, 10:43 PM
Have you checked scope boxes and the like? Otherwise it sounds like an ADSK support question.

Nick

Max Lloyd
2008-02-18, 10:50 PM
Was the project ever mirrored? (using the old 'mirror project' command). Sometimes strange things like this would occur after using that tool.....

Regardless, no solution to offer I'm afraid!

Max

ErichB
2008-02-18, 10:51 PM
There are no scope boxes with this tag or the section tag. I have not mirrored the project -thankfully I have not run into that need! :)

I have tried auditing, recreating the central file, purging, etc. Nothing seems to be able to fix it. It is really strange. Anyone else had similar problems and found workarounds?