Multi Floor Stair Problem

[STHRevit]

I Have an issue with the stairs in my project.
The floor to floor distance form Ground floor to level 1 is 3600mm
The floor to floor distance from level 1 to level 2 is 3000mm.
I have created two stairs due to the different levels. Got them to work fine. How do i now create a continuous handrail?
So in essence the rail willcontinue from ground floor to level 2?

Is this actually possible?

Any help appreciated.

[Scott Womack]

I Have an issue with the stairs in my project.
The floor to floor distance form Ground floor to level 1 is 3600mm
The floor to floor distance from level 1 to level 2 is 3000mm.
I have created two stairs due to the different levels. Got them to work fine. How do i now create a continuous handrail?
So in essence the rail will continue from ground floor to level 2?

Is this actually possible?

Any help appreciated.

No it is not really possible you can create a railing that is not hosted, and calculate all the points to cause the slope. The intent of Revit as I understand it, is to have the railings on each stair section, then you may have to take the turns, or end points of the railing and adjust them so the ends appear continuous.