How to creat piping system for fan coil unit

[lei.jamie122]

I am learning Revit mep. have done some exercises as per tutorial. now, I am trying to creat a system with fan coil unit and primary air handing unit. The air side is not a promblem. But have no idea how to creat the waterside, such as how cooling water pipe connect to fan coil unit. seems there is no connection fitting for the pipe to connect to fan coil unit or air handling unit. hope someone could give me some hint or reference. thanks in advance!

[Ian Matthews]

Lei, first off you may be better off putting these sort of questions in the MEP section of the forum. You may get a quicker response.

If you're using a fan coil out of the box (as supplied with Revit), such as M_Indoor AHU - Horizontal - Chilled Water Coil.rfa, then it does come with chilled water connections.

If you're making a family up yourself, then I'd suggest making a little stub pipe coming out of the side of your unit, then adding a pipe connector to that. See the rfa noted above for what it should look like.