david_peterson
2008-12-04, 09:32 PM
I'm having an issue with getting the lines for a web joist to display correctly.
They should have a line similar to a Phantom line. And out of the box, they are set up to get this line type. But when you look at the attached image, the bottom 2 joist display correctly, but the upper joist do not. Both are part of a beam system, both were created using the exact same method. Both are set to the same elevations, the extentions at the ends are the same. There's nothing different that I can find, yet they display differently.
Anyone have any idea how to fix this. Or is this a Adesk Opps that just can't be fixed.
Thanks
file:///C:/DOCUME%7E1/DPETER%7E1/LOCALS%7E1/Temp/moz-screenshot-39.jpg
They should have a line similar to a Phantom line. And out of the box, they are set up to get this line type. But when you look at the attached image, the bottom 2 joist display correctly, but the upper joist do not. Both are part of a beam system, both were created using the exact same method. Both are set to the same elevations, the extentions at the ends are the same. There's nothing different that I can find, yet they display differently.
Anyone have any idea how to fix this. Or is this a Adesk Opps that just can't be fixed.
Thanks
file:///C:/DOCUME%7E1/DPETER%7E1/LOCALS%7E1/Temp/moz-screenshot-39.jpg