techsupport.161645
2008-12-09, 08:57 PM
We just recently purchased some new workstations as we are begining our Revit 2009 implementation. All seems to be running pretty well but noticed when moving a view window or dialog boxes around on the screen, the following is occuring. (see attached image). Once the dialog box is unclicked the trailing effect disappears.
Workstation Specs:
HP XW4600
Intel® CoreT 2 Duo E6850 3.00 GHz, 4 MB, 1333 MHz FSB
NVIDIA Quadro FX370 256MB PCIe
HP 4GB (4x1GB) DDR2-800 ECC RAM (E-STAR=M)
HP 250GB SATA 3Gb/s NCQ 7200 1st HDD (E-STAR=M, H)
I do not have the 3G switch enabled in the boot.ini and have not tried that option. We do not do a ton of rendering so I figured the 256MB video card would be sufficient. Revit it self runs fine, it just when moving views and dialog boxes around.
Any thoughts is appreciated.
Workstation Specs:
HP XW4600
Intel® CoreT 2 Duo E6850 3.00 GHz, 4 MB, 1333 MHz FSB
NVIDIA Quadro FX370 256MB PCIe
HP 4GB (4x1GB) DDR2-800 ECC RAM (E-STAR=M)
HP 250GB SATA 3Gb/s NCQ 7200 1st HDD (E-STAR=M, H)
I do not have the 3G switch enabled in the boot.ini and have not tried that option. We do not do a ton of rendering so I figured the 256MB video card would be sufficient. Revit it self runs fine, it just when moving views and dialog boxes around.
Any thoughts is appreciated.